Is Water From Fridge Dispenser Units Pure Enough For Drinking?

Drinking water from a water and fridge dispenser unit is very refreshing. Water straight from the refrigerator dispenser adds sparkle to drinks and that is the reason why the refrigerator water filter was created.

Refrigerators that do not have built-in water filters for cooling filtered water automatically make use of inline filters. These filters are installed behind the refrigerator.

Replacement filters are very easy to install. You simply twist the filter to unscrew the old filter, and then screw in the new one.

The California Conference for Directors of Environmental Health (CCDEH) has realized that people have problems when handling and using water dispensers. Some waterborne diseases have been linked to dispensing water from these units.

Why use a water dispenser unit?

The guidelines below are meant to provide information on safe practices for public use facilities to lower diseases that are caused by incorrect storage, use, and refilling of water coolers or portable water dispensers.

CCDEH requires that these guidelines be distributed to public use facilities that provide water coolers or portable dispensers for drinking water. Such facilities include golf courses, sports parks, hiking trails, and day care facilities.

Benefits of safe drinking water...

Ice And Water
Ice and water need to be supplied from a public approved water supply or distribution system which is tested and follows all water regulations. Ice machines need only be placed in the correct positions and these places should be free from contaminates. Ice must only be dispensed using a clean ice scoop and not by bare-hand.
Water Dispensers
Water dispensers must be manufactured in such a way that allows easy cleaning of food grade materials. The spigot should be of a gravity flow design to stop it from being contaminated during use. Water dispensers must be cleaned after a day in a wash-rinse-sanitize technique in a three-compartment sink. The compartments of the sink must be of perfect size to allow immersion of the dispenser and spigot.

For dispensers too large to be immersed in the sink, a clean and sanitize in-place procedure should be used. This includes use of a clean bucket and wash cloth for the detergent cleaning steps, followed by rinsing the container at least three times with water; and finally, spraying the inside of the dispenser and spigot with a sanitizer solution. An area to allow proper air-drying of dispensers should be provided. Dispensers and/or spigots must not be stored on the floor at any time.
Dispenser Filling
Dispensers must be filled in an area which does not have dust, insects or other environmental contaminants. The dispensers must not be placed on the floor or ground while filling. Dispensers must be filled in a room with smooth, dry, easily cleanable floors, walls, and ceilings. They should also be kept far from chemicals or other contaminants.

Water hoses used to fill dispensers must be food grade (garden hoses are not allowed) and must never be stored on the ground or were they can be submerged into a drain. Hoses must only be used only for drinking water dispenser filling and not to fill or clean other equipment or tanks (like as pesticide, herbicide, battery containers).

All plumbing equipment and connections must be in compliance with applicable plumbing codes to protect the water supply.

You can read a wide range of water usage articles. They discuss the use of water in the house and home ... topics covered include filters, heaters, softeners and water in the garden.